Wet Bagging Adjustable Stainless Steel Valve Assembly 2 Part Blend
In stock! This valve assembly consists of a fully welded painted steel 4 bolt flange and center body, 2 stainless steel valves, center divider, adjustable flap gates on each side, and a 3D printed 3″ PVC water chute adapter. The gates are slightly offset to allow 50/50 and 30/70 adjustments as needed for different species. The valves will work with a pelletized substrates such as soybean hull, alfalfa pellets, beet pulp, and fuel pellets. These are designed for XLS-A bags around 10-11 LBS or 5-6 LB bags if one side is used with a pre-mixed substrate by simply mixing the dry pellets in a tote or cement mixer then filling the hopper, 3+ part blends can also be accomplished like this. Also included is a digital shopping list of all components required to complete the build and a hose schematic for hooking up the pneumatics, The remaining parts cost around $500 from various online sources Also available are the water valves that go with the additional parts to complete this assembly https://myersmushrooms.com/shop/ols/products/3-ss-paddle-pvc-slip-x-slip-valve-set-of-2.
This kit is for DIY & handy growers. If you are not capable of fabricating your own hopper and please DO NOT BUY THIS and expect us to walk you step by step designing and making a hopper on your own. Instead buy the turnkey unit. https://myersmushrooms.com/shop/ols/products/wet-bagger-bagging-system No blueprints or plans will be shared for the FCS/Myers Mushrooms hopper design.